Dragon 3.11-2 by Bruno Lucas is available !

[Frank Quisinsky]

Geschrieben von:/Posted by: Frank Quisinsky at 02 March 2000 18:08:29:
Hello,
all information stand in my News Ticker !
Regards
Frank

[Phil]

Geschrieben von:/Posted by: Phil at 02 March 2000 18:50:50:
Als Antwort auf:/As an answer to: Dragon 3.11-2 by Bruno Lucas is available ! geschrieben von:/posted by: Frank Quisinsky at 02 March 2000 18:08:29:

Hello,
all information stand in my News Ticker !
Regards
Frank

Hi!
Is this version suppose to work under Fritz 6?? Because I doesn't. It always say's "illegal move a1-a1 please try again" I'm just wondering why this happends.
Thanks,

[Frank Quisinsky]

Geschrieben von:/Posted by: Frank Quisinsky at 02 March 2000 19:38:13:
Als Antwort auf:/As an answer to: Re: Dragon 3.11-2 by Bruno Lucas is available ! geschrieben von:/posted by: Phil at 02 March 2000 18:50:50:
Hi Phil,

Is this version suppose to work under Fritz 6?? Because I doesn't. It always say's "illegal move a1-a1 please try again" I'm just wondering why this happends.
Thanks,

I read your message for minutes and my answere:
AMD K6-3 450 MHz, 32 MB for hashtables, 4-pieces Nalimov (Junior) and 4-pieces Edwards TBs (Dragon), fisher clock 4+1 !
Dragon 3.11-2 - Junior 6a ½ : 1½
Test games for you !
Please tell me your configurations or check the Phase X Chess-Base configuration page (written in german) ! I think you made an error in your configuration !
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "1"]
[White "Dragon 3.11"]
[Black "Junior 6.0"]
[Result "1/2-1/2"]
[ECO "E92"]
[PlyCount "103"]
{W=8.3 ply; 88kN/s
B=12.7 ply; 375kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {Beide letzter Buchzug 0} 18. Nxe6 {-0.12/7 12} 18... fxe6 {0.13/12 12} 19.
f4 {-0.19/8 9} 19... Bf6 {0.06/13 11} 20. Bg2 {(Re1) -0.23/7 11} 20... Qa5 {
(Nf5) 0.01/13 8} 21. a3 {0.06/8 9} 21... Rad8 {(Nf5) -0.02/13 10} 22. b4 {
(Rac1) 0.11/8 9} 22... Qc7 {0.11/13 10} 23. Re1 {0.13/7 8} 23... Nf5 {0.11/13 9
} 24. Rad1 {0.07/7 9} 24... Qg7 {0.02/12 10} 25. Ne2 {0.14/7 9} 25... Nh6 {
(Re7) 0.00/12 7} 26. a4 {(Bf3) 0.31/8 8} 26... Ng4 {0.24/14 15} 27. Bd4 {
0.58/7 8} 27... Nxd4 {0.33/12 11} 28. Nxd4 {0.49/8 8} 28... Bxd4+ {
(e5) 0.33/12 7} 29. Qxd4 {0.72/9 7} 29... Qxd4+ {0.30/13 7} 30. Rxd4 {0.81/9 7}
30... Kf7 {(h5) 0.27/14 6} 31. h3 {(Bh3) 0.80/8 8} 31... Nh6 {0.16/14 8} 32. g4
{0.73/8 7} 32... Ng8 {(Rc8) 0.23/14 5} 33. Rd3 {(f5) 0.56/8 7} 33... Ne7 {
-0.04/14 7} 34. h4 {(Rde3) 0.33/8 7} 34... Rc8 {(Nc6) -0.05/12 8} 35. Bf3 {
(Rde3) 0.34/8 7} 35... Nc6 {(a5) -0.10/13 11} 36. b5 {0.08/8 6} 36... Nb4 {
(axb5) -0.19/12 10} 37. Rc3 {0.20/8 7} 37... Re7 {(Na2) -0.19/12 6} 38. Re2 {
(g5) 0.37/7 7} 38... a5 {(axb5) -0.30/12 5} 39. Kh2 {0.48/7 5} 39... Rd7 {
(Rec7) -0.38/12 4} 40. Kh1 {(Bh1) 0.40/7 6} 40... Rdc7 {(d4) -0.30/11 3} 41.
Rce3 {0.43/8 6} 41... Re7 {(Re8) -0.29/12 6} 42. f5 {(Kg2) 0.35/8 8} 42... gxf5
{(Rxc5) -0.30/12 4} 43. gxf5 {0.65/9 5} 43... e5 {(Kf6) -0.12/12 8} 44. Rxe5 {
0.63/9 6} 44... Rxe5 {-0.17/12 3} 45. Rxe5 {0.71/10 6} 45... Rxc5 {
(Kf6) -0.24/12 3} 46. Re6 {0.64/8 4} 46... d4 {0.17/13 21} 47. Bh5+ {
(Rb6) 0.66/8 5} 47... Kg8 {(Kf8) 0.00/13 3} 48. Re8+ {0.64/8 4} 48... Kg7 {
0.00/3 0} 49. Re7+ {0.61/8 5} 49... Kg8 {(Kh6) 0.18/14 16} 50. Re8+ {
(Rxb7) 0.63/8 5} 50... Kg7 {0.00/3 0} 51. Re7+ {0.61/8 5} 51... Kg8 {
(Kh6) 0.00/15 11} 52. Re8+ {Remis angenommen 0.63/8 4} 1/2-1/2
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "2"]
[White "Junior 6.0"]
[Black "Dragon 3.11"]
[Result "1-0"]
[ECO "E92"]
[PlyCount "78"]
{W=12.2 ply; 345kN/s
B=7.6 ply; 83kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {0} 18. Nxe6 {0.08/12 15} 18... fxe6 {-0.38/7 10} 19. f4 {0.08/13 15} 19...
Bf6 {-0.43/8 10} 20. Na4 {(a3) 0.12/13 10} 20... Rc8 {(Qe7) -0.54/8 9} 21. Nb6
{0.26/14 12} 21... Rc7 {-0.53/8 10} 22. Bg2 {(Bh3) 0.29/14 14} 22... g5 {
(Nf5) -0.45/7 9} 23. Qc2 {0.41/12 12} 23... Nb4 {(Kh8) -0.20/7 9} 24. Qa4 {
(Qb3) 1.13/12 7} 24... Bxb2 {(a5) 0.56/8 10} 25. Rab1 {1.94/11 11} 25... Bc3 {
1.09/7 9} 26. Rb3 {2.17/12 12} 26... Nxa2 {(Qf6) 1.02/8 9} 27. Qxa2 {2.29/12 6}
27... Bf6 {1.32/8 8} 28. f5 {2.65/12 7} 28... d4 {(Nxf5) 1.54/7 8} 29. fxe6 {
3.06/11 3} 29... Nxe6 {2.27/7 7} 30. Nd5 {3.34/11 5} 30... Rxc5 {2.58/7 8} 31.
Nxf6+ {3.53/11 5} 31... Qxf6 {2.69/8 8} 32. Rxb7 {3.84/11 5} 32... Rd8 {
2.76/6 6} 33. Rb6 {4.27/11 4} 33... Re5 {3.38/7 7} 34. Bh3 {(Rxa6) 4.73/11 4}
34... g4 {4.14/7 6} 35. Bxg4 {5.07/11 12} 35... Re8 {4.39/7 7} 36. Rxd4 {
(Rxa6) 5.20/12 16} 36... a5 {(Qg6) 4.60/7 14} 37. Bxe6+ {(Rd5) 7.80/9 3} 37...
R8xe6 {5.31/7 6} 38. Rg4+ {(Rf4) 8.62/9 3} 38... Kf8 {7.02/7 7} 39. Rb8+ {
(Qc4) 8.92/10 8} 39... Kf7 {7.00/7 6} 1-0

[Phil]

Geschrieben von:/Posted by: Phil at 03 March 2000 00:05:54:
Als Antwort auf:/As an answer to: Re: Dragon 3.11-2 by Bruno Lucas is available ! geschrieben von:/posted by: Frank Quisinsky at 02 March 2000 19:38:13:

Hi Phil,

Is this version suppose to work under Fritz 6?? Because I doesn't. It always say's "illegal move a1-a1 please try again" I'm just wondering why this happends.
Thanks,

I read your message for minutes and my answere:
AMD K6-3 450 MHz, 32 MB for hashtables, 4-pieces Nalimov (Junior) and 4-pieces Edwards TBs (Dragon), fisher clock 4+1 !
Dragon 3.11-2 - Junior 6a ½ : 1½
Test games for you !
Please tell me your configurations or check the Phase X Chess-Base configuration page (written in german) ! I think you made an error in your configuration !
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "1"]
[White "Dragon 3.11"]
[Black "Junior 6.0"]
[Result "1/2-1/2"]
[ECO "E92"]
[PlyCount "103"]
{W=8.3 ply; 88kN/s
B=12.7 ply; 375kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {Beide letzter Buchzug 0} 18. Nxe6 {-0.12/7 12} 18... fxe6 {0.13/12 12} 19.
f4 {-0.19/8 9} 19... Bf6 {0.06/13 11} 20. Bg2 {(Re1) -0.23/7 11} 20... Qa5 {
(Nf5) 0.01/13 8} 21. a3 {0.06/8 9} 21... Rad8 {(Nf5) -0.02/13 10} 22. b4 {
(Rac1) 0.11/8 9} 22... Qc7 {0.11/13 10} 23. Re1 {0.13/7 8} 23... Nf5 {0.11/13 9
} 24. Rad1 {0.07/7 9} 24... Qg7 {0.02/12 10} 25. Ne2 {0.14/7 9} 25... Nh6 {
(Re7) 0.00/12 7} 26. a4 {(Bf3) 0.31/8 8} 26... Ng4 {0.24/14 15} 27. Bd4 {
0.58/7 8} 27... Nxd4 {0.33/12 11} 28. Nxd4 {0.49/8 8} 28... Bxd4+ {
(e5) 0.33/12 7} 29. Qxd4 {0.72/9 7} 29... Qxd4+ {0.30/13 7} 30. Rxd4 {0.81/9 7}
30... Kf7 {(h5) 0.27/14 6} 31. h3 {(Bh3) 0.80/8 8} 31... Nh6 {0.16/14 8} 32. g4
{0.73/8 7} 32... Ng8 {(Rc8) 0.23/14 5} 33. Rd3 {(f5) 0.56/8 7} 33... Ne7 {
-0.04/14 7} 34. h4 {(Rde3) 0.33/8 7} 34... Rc8 {(Nc6) -0.05/12 8} 35. Bf3 {
(Rde3) 0.34/8 7} 35... Nc6 {(a5) -0.10/13 11} 36. b5 {0.08/8 6} 36... Nb4 {
(axb5) -0.19/12 10} 37. Rc3 {0.20/8 7} 37... Re7 {(Na2) -0.19/12 6} 38. Re2 {
(g5) 0.37/7 7} 38... a5 {(axb5) -0.30/12 5} 39. Kh2 {0.48/7 5} 39... Rd7 {
(Rec7) -0.38/12 4} 40. Kh1 {(Bh1) 0.40/7 6} 40... Rdc7 {(d4) -0.30/11 3} 41.
Rce3 {0.43/8 6} 41... Re7 {(Re8) -0.29/12 6} 42. f5 {(Kg2) 0.35/8 8} 42... gxf5
{(Rxc5) -0.30/12 4} 43. gxf5 {0.65/9 5} 43... e5 {(Kf6) -0.12/12 8} 44. Rxe5 {
0.63/9 6} 44... Rxe5 {-0.17/12 3} 45. Rxe5 {0.71/10 6} 45... Rxc5 {
(Kf6) -0.24/12 3} 46. Re6 {0.64/8 4} 46... d4 {0.17/13 21} 47. Bh5+ {
(Rb6) 0.66/8 5} 47... Kg8 {(Kf8) 0.00/13 3} 48. Re8+ {0.64/8 4} 48... Kg7 {
0.00/3 0} 49. Re7+ {0.61/8 5} 49... Kg8 {(Kh6) 0.18/14 16} 50. Re8+ {
(Rxb7) 0.63/8 5} 50... Kg7 {0.00/3 0} 51. Re7+ {0.61/8 5} 51... Kg8 {
(Kh6) 0.00/15 11} 52. Re8+ {Remis angenommen 0.63/8 4} 1/2-1/2
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "2"]
[White "Junior 6.0"]
[Black "Dragon 3.11"]
[Result "1-0"]
[ECO "E92"]
[PlyCount "78"]
{W=12.2 ply; 345kN/s
B=7.6 ply; 83kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {0} 18. Nxe6 {0.08/12 15} 18... fxe6 {-0.38/7 10} 19. f4 {0.08/13 15} 19...
Bf6 {-0.43/8 10} 20. Na4 {(a3) 0.12/13 10} 20... Rc8 {(Qe7) -0.54/8 9} 21. Nb6
{0.26/14 12} 21... Rc7 {-0.53/8 10} 22. Bg2 {(Bh3) 0.29/14 14} 22... g5 {
(Nf5) -0.45/7 9} 23. Qc2 {0.41/12 12} 23... Nb4 {(Kh8) -0.20/7 9} 24. Qa4 {
(Qb3) 1.13/12 7} 24... Bxb2 {(a5) 0.56/8 10} 25. Rab1 {1.94/11 11} 25... Bc3 {
1.09/7 9} 26. Rb3 {2.17/12 12} 26... Nxa2 {(Qf6) 1.02/8 9} 27. Qxa2 {2.29/12 6}
27... Bf6 {1.32/8 8} 28. f5 {2.65/12 7} 28... d4 {(Nxf5) 1.54/7 8} 29. fxe6 {
3.06/11 3} 29... Nxe6 {2.27/7 7} 30. Nd5 {3.34/11 5} 30... Rxc5 {2.58/7 8} 31.
Nxf6+ {3.53/11 5} 31... Qxf6 {2.69/8 8} 32. Rxb7 {3.84/11 5} 32... Rd8 {
2.76/6 6} 33. Rb6 {4.27/11 4} 33... Re5 {3.38/7 7} 34. Bh3 {(Rxa6) 4.73/11 4}
34... g4 {4.14/7 6} 35. Bxg4 {5.07/11 12} 35... Re8 {4.39/7 7} 36. Rxd4 {
(Rxa6) 5.20/12 16} 36... a5 {(Qg6) 4.60/7 14} 37. Bxe6+ {(Rd5) 7.80/9 3} 37...
R8xe6 {5.31/7 6} 38. Rg4+ {(Rf4) 8.62/9 3} 38... Kf8 {7.02/7 7} 39. Rb8+ {
(Qc4) 8.92/10 8} 39... Kf7 {7.00/7 6} 1-0

------------------------------------------------------------------------------
Well It won't work. No mater what i do!!! It keeps saying "illegal move a1-a1 please try again" It goes though all the book moves but after about 5 seconds of thinking it just doesn't work... All my other 29 winboard engines work just fine! Oh well I'm not going to cry over it
I'm not sure what you mean by configurations. I do the same for all winboard engines just make a folder in the /engines folder name it Dragon311 put all the files in there and make a .eng file using the one on chessbase and name it Dragon311. I do this for all Winboard engines, it works just fine for them.
Do I have to do anything special with Dragon? Like rename a file or something?
I tried everything...
Oh well. Thanks for your help Frank. Nice webpage!
Phil.

[Frank Quisinsky]

Geschrieben von:/Posted by: Frank Quisinsky at 03 March 2000 14:56:42:
Als Antwort auf:/As an answer to: Re: Dragon 3.11-2 by Bruno Lucas is available ! geschrieben von:/posted by: Phil at 03 March 2000 00:05:54:

Hi Phil,

Is this version suppose to work under Fritz 6?? Because I doesn't. It always say's "illegal move a1-a1 please try again" I'm just wondering why this happends.
Thanks,

I read your message for minutes and my answere:
AMD K6-3 450 MHz, 32 MB for hashtables, 4-pieces Nalimov (Junior) and 4-pieces Edwards TBs (Dragon), fisher clock 4+1 !
Dragon 3.11-2 - Junior 6a ½ : 1½
Test games for you !
Please tell me your configurations or check the Phase X Chess-Base configuration page (written in german) ! I think you made an error in your configuration !
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "1"]
[White "Dragon 3.11"]
[Black "Junior 6.0"]
[Result "1/2-1/2"]
[ECO "E92"]
[PlyCount "103"]
{W=8.3 ply; 88kN/s
B=12.7 ply; 375kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {Beide letzter Buchzug 0} 18. Nxe6 {-0.12/7 12} 18... fxe6 {0.13/12 12} 19.
f4 {-0.19/8 9} 19... Bf6 {0.06/13 11} 20. Bg2 {(Re1) -0.23/7 11} 20... Qa5 {
(Nf5) 0.01/13 8} 21. a3 {0.06/8 9} 21... Rad8 {(Nf5) -0.02/13 10} 22. b4 {
(Rac1) 0.11/8 9} 22... Qc7 {0.11/13 10} 23. Re1 {0.13/7 8} 23... Nf5 {0.11/13 9
} 24. Rad1 {0.07/7 9} 24... Qg7 {0.02/12 10} 25. Ne2 {0.14/7 9} 25... Nh6 {
(Re7) 0.00/12 7} 26. a4 {(Bf3) 0.31/8 8} 26... Ng4 {0.24/14 15} 27. Bd4 {
0.58/7 8} 27... Nxd4 {0.33/12 11} 28. Nxd4 {0.49/8 8} 28... Bxd4+ {
(e5) 0.33/12 7} 29. Qxd4 {0.72/9 7} 29... Qxd4+ {0.30/13 7} 30. Rxd4 {0.81/9 7}
30... Kf7 {(h5) 0.27/14 6} 31. h3 {(Bh3) 0.80/8 8} 31... Nh6 {0.16/14 8} 32. g4
{0.73/8 7} 32... Ng8 {(Rc8) 0.23/14 5} 33. Rd3 {(f5) 0.56/8 7} 33... Ne7 {
-0.04/14 7} 34. h4 {(Rde3) 0.33/8 7} 34... Rc8 {(Nc6) -0.05/12 8} 35. Bf3 {
(Rde3) 0.34/8 7} 35... Nc6 {(a5) -0.10/13 11} 36. b5 {0.08/8 6} 36... Nb4 {
(axb5) -0.19/12 10} 37. Rc3 {0.20/8 7} 37... Re7 {(Na2) -0.19/12 6} 38. Re2 {
(g5) 0.37/7 7} 38... a5 {(axb5) -0.30/12 5} 39. Kh2 {0.48/7 5} 39... Rd7 {
(Rec7) -0.38/12 4} 40. Kh1 {(Bh1) 0.40/7 6} 40... Rdc7 {(d4) -0.30/11 3} 41.
Rce3 {0.43/8 6} 41... Re7 {(Re8) -0.29/12 6} 42. f5 {(Kg2) 0.35/8 8} 42... gxf5
{(Rxc5) -0.30/12 4} 43. gxf5 {0.65/9 5} 43... e5 {(Kf6) -0.12/12 8} 44. Rxe5 {
0.63/9 6} 44... Rxe5 {-0.17/12 3} 45. Rxe5 {0.71/10 6} 45... Rxc5 {
(Kf6) -0.24/12 3} 46. Re6 {0.64/8 4} 46... d4 {0.17/13 21} 47. Bh5+ {
(Rb6) 0.66/8 5} 47... Kg8 {(Kf8) 0.00/13 3} 48. Re8+ {0.64/8 4} 48... Kg7 {
0.00/3 0} 49. Re7+ {0.61/8 5} 49... Kg8 {(Kh6) 0.18/14 16} 50. Re8+ {
(Rxb7) 0.63/8 5} 50... Kg7 {0.00/3 0} 51. Re7+ {0.61/8 5} 51... Kg8 {
(Kh6) 0.00/15 11} 52. Re8+ {Remis angenommen 0.63/8 4} 1/2-1/2
[Event "AMD K6-3 450, Blitz:4'"]
[Site "Trier"]
[Date "2000.03.02"]
[Round "2"]
[White "Junior 6.0"]
[Black "Dragon 3.11"]
[Result "1-0"]
[ECO "E92"]
[PlyCount "78"]
{W=12.2 ply; 345kN/s
B=7.6 ply; 83kN/s
} 1. d4 {0} 1... Nf6 {0} 2. c4 {0}
2... g6 {0} 3. Nc3 {0} 3... Bg7 {0} 4. e4 {0} 4... d6 {0} 5. Be2 {0} 5... O-O {
0} 6. Nf3 {0} 6... e5 {0} 7. Be3 {0} 7... exd4 {0} 8. Nxd4 {0} 8... Re8 {0} 9.
f3 {0} 9... c6 {0} 10. Bf2 {0} 10... d5 {0} 11. exd5 {0} 11... cxd5 {0} 12. O-O
{0} 12... Nc6 {0} 13. c5 {0} 13... Nh5 {0} 14. Qd2 {0} 14... Be5 {-0.08/11 6}
15. g3 {0} 15... Ng7 {-0.08/11 9} 16. Rfd1 {0} 16... a6 {0} 17. Bf1 {0} 17...
Be6 {0} 18. Nxe6 {0.08/12 15} 18... fxe6 {-0.38/7 10} 19. f4 {0.08/13 15} 19...
Bf6 {-0.43/8 10} 20. Na4 {(a3) 0.12/13 10} 20... Rc8 {(Qe7) -0.54/8 9} 21. Nb6
{0.26/14 12} 21... Rc7 {-0.53/8 10} 22. Bg2 {(Bh3) 0.29/14 14} 22... g5 {
(Nf5) -0.45/7 9} 23. Qc2 {0.41/12 12} 23... Nb4 {(Kh8) -0.20/7 9} 24. Qa4 {
(Qb3) 1.13/12 7} 24... Bxb2 {(a5) 0.56/8 10} 25. Rab1 {1.94/11 11} 25... Bc3 {
1.09/7 9} 26. Rb3 {2.17/12 12} 26... Nxa2 {(Qf6) 1.02/8 9} 27. Qxa2 {2.29/12 6}
27... Bf6 {1.32/8 8} 28. f5 {2.65/12 7} 28... d4 {(Nxf5) 1.54/7 8} 29. fxe6 {
3.06/11 3} 29... Nxe6 {2.27/7 7} 30. Nd5 {3.34/11 5} 30... Rxc5 {2.58/7 8} 31.
Nxf6+ {3.53/11 5} 31... Qxf6 {2.69/8 8} 32. Rxb7 {3.84/11 5} 32... Rd8 {
2.76/6 6} 33. Rb6 {4.27/11 4} 33... Re5 {3.38/7 7} 34. Bh3 {(Rxa6) 4.73/11 4}
34... g4 {4.14/7 6} 35. Bxg4 {5.07/11 12} 35... Re8 {4.39/7 7} 36. Rxd4 {
(Rxa6) 5.20/12 16} 36... a5 {(Qg6) 4.60/7 14} 37. Bxe6+ {(Rd5) 7.80/9 3} 37...
R8xe6 {5.31/7 6} 38. Rg4+ {(Rf4) 8.62/9 3} 38... Kf8 {7.02/7 7} 39. Rb8+ {
(Qc4) 8.92/10 8} 39... Kf7 {7.00/7 6} 1-0

------------------------------------------------------------------------------
Well It won't work. No mater what i do!!! It keeps saying "illegal move a1-a1 please try again" It goes though all the book moves but after about 5 seconds of thinking it just doesn't work... All my other 29 winboard engines work just fine! Oh well I'm not going to cry over it
I'm not sure what you mean by configurations. I do the same for all winboard engines just make a folder in the /engines folder name it Dragon311 put all the files in there and make a .eng file using the one on chessbase and name it Dragon311. I do this for all Winboard engines, it works just fine for them.
Do I have to do anything special with Dragon? Like rename a file or something?
I tried everything...
Oh well. Thanks for your help Frank. Nice webpage!
Phil.

Hi,
thanks for these compliments.
Phil, you are not the first user with problems. In the CSS Forum has a user the same problems and 2 other user wrote me an eMail with the same problems !
And now ?
I can play with Dragon under Fritz SP1 with the latest adapter (Aug. 99).
I can not help and not see problems, unfortunately !
My Dragon_311.init:
-
[Parameter]
CommandLine = xboard
Engine = Dragon 3.11
Author = Bruno Lucas, France
Debug = False
[Support]
AnalyzeMode = False
PonderMode = False
CastleAndEP = False
-
My Dragon_311.ini
-
c:\chess\edwards
20
-
20 = 32 MB for hashtables !
c:\Chess\CBase\Fritz6\Engines\Dragon_311.eng
c:\Chess\CBase\Fritz6\Engines\Dragon_311\Dragon_311.exe
c:\Chess\CBase\Fritz6\Engines\Dragon_311\Dragon.ini
c:\Chess\CBase\Fritz6\Engines\Dragon_311\Dragon_311.init
c:\Chess\CBase\Fritz6\Engines\Dragon_311\Dragon_bib
c:\Chess\CBase\Fritz6\Engines\Dragon_311\Nom_ECO.txt
c:\Chess\Edwards (for the edwards TBs)
For the TB directorys (Nalimov, Edwards) please
use not more than 8 letter !
(I think it is better)
I use Fritz 6 SP1 and following adapter:
Fritz6.exe : 23.01.00, 2.723.840 bytes
*.eng (adapter): 10.08.99, 22.528 bytes
Edwards files : --.--.--, 273.220.864 bytes

I hope this example for configurations solved the problems !
And ...
When you edit a file please set after the last figure an enter !
Example: Dragon_311.init
-
[Parameter]
CommandLine = xboard
Engine = Dragon 3.11
Author = Bruno Lucas, France
Debug = False
[Support]
AnalyzeMode = False
PonderMode = False
CastleAndEP = False*
*
After (e) fals(e) an enter !
Please in all files !
-
Example: Dragon.ini
-
c:\chess\edwards
20*
*
-
After 0 an enter for the next line !
A good editor is Ultra Edit (latest version 7.0b), but you can find a lot of good editors in the internet.
Maybe the reason ?
I don´t know !
Regards
Frank